Cutting The Hood

We used a dremel with a cut off wheel to cut through the first layer of fiberglass.

Prying The Hood Off

We used a couple of putty knifes and a rubber mallet to separate the two pieces. (They are glued together)

Prying The Hood Off (Part 2)

We used a strip of metal and a rubber mallet to separate the two layers of  the hood in the middle where the putty knifes could not reach.

The Strip Of Metal

The Hood Separated

The piece of hood after it was completely pried off.

The Second Layer

This is what we were left with after the top layer of the hood was removed and the excess glue was removed.

After Final Cutting And Grinding

Test Fitting